The 100 watts LED Driver is a State –of –the-art constant current power supply providing constant currents from 1 to 21 Amps. to drive high power LEDs and any other load that requires a constant current drive. Its current can be set by a local control or by a remote DC signal from 0.5 to 2.5 VDC. Its High current range provides for multiple uses.
Input Voltage Range 90 to 264 VAC
Input Frequency 47 to 63 Hz.
Input Current @ 100 watts 1.2 A @ 115 VAC, 0.5 A @ 264 VAC
Inrush Current 20 A at 115 VAC
Power Factor >0.95 at all input voltages
Efficiency >85 %, excluding auxiliary supply
Output Current Local / Remote set from 1 A to 21 A
Output Compliance Voltage 0.1 to 4.8 VDC, Higher voltage options available
Line Regulation ± 1%
Load Regulation ± 3%
Ripple & Noise <5 % pk - pk
Protection Short circuit (Trip & reset)
Over temperature shutdown, trip 90°C
Auxiliary Output Voltage 12 ± 0.2 VDC
Auxiliary Output Current 0.9 A
Current Setting (Local / Remote) Local Control or Remote with a 0.5 to 2.5 VDC signal
Operating Temperature - 10°C to 40°C
Storage Temperature - 10°C to 70°C
Operating Humidity 5 to 93 % RH, non-condensing
Safety Approval IEC60601 - 1
Altitude 0 to 20,000 ft
Size 7.25” L X 3.25” W X 2” H
Weight 1 lb.